What to pay attention to when starting the cone crusher

 Cone crusher is currently a kind of crushing machinery and equipment used in the mining industry. It has a wide range of applications and is *ly used in the construction of mines, railways, bridges, and roads.

Before starting the cone crusher, you need to check whether the cone crusher is normal. Especially the parts of the crusher must be carefully inspected. In order to ensure the smooth and efficient operation of the cone crusher and ensure the production efficiency, we have to do a daily inspection.

Of course, before starting, in order to ensure the effect of operation, there are some precautions to be prepared. Let us take a look at the precautions for each component below.

1. The fuel tank, before starting, the * thing to do is to check whether the fuel in the fuel tank is full, and add it immediately if it is found to be insufficient. When there is an oil leak, it must be repaired in time to ensure that there will not be any failures related to the hydraulic oil.

,

2. The discharge port and the discharge port of the cone crusher should be checked regularly. The discharge port is the place where the finished product comes out. It is very critical and directly affects the output and quality. Once the discharge port is too large or too small, it must be adjusted in time, otherwise it may cause product quality problems and affect production.

3. The lubrication system, the reason why the cone crusher can operate normally, the lubrication system plays a huge role. The raw materials of the parts of the crusher are generally steel castings, etc., which are more susceptible to rust. Generally, a certain amount of lubrication is required to ensure the normal production.

, 4, frame, before the cone crusher runs, the frame of the equipment should be carefully checked. In order to ensure that there will be no mistakes in the work, it is necessary to ensure that the normal contact between the frame and the base is not loose. Once it is found that the screw is not tightened, the operator must be notified in time and the screw must be tightened.