What to do to reduce the downtime of the sand making machine

The sand making machine sometimes  suddenly, which not only causes damage to the machine itself, but also affects the normal production efficiency of the entire production line. Jiaozuo Zhongxin Heavy Industry introduced how to reduce the occurrence of such phenomena and make mining equipment more in line with high-standard sand making requirements.

1. Check the working voltage of the sand making machine. If the working voltage of the sand making machine is unstable or too low, it is very easy to s* the crushing equipment. Therefore, the maintenance personnel should regularly check the daily working voltage of the sand making equipment, and adjust it in time if there is any change to make it meet the production working voltage requirements.

2. Check whether the parts of the sand making machine are loose. If the eccentric shaft tightening bush of the sand making machine becomes loose, the eccentric shaft will be stuck and the crushing equipment will s*. In addition, when the parts of other key parts become loose, it will also affect the normal operation of the sand making machine. Therefore, in the daily production process, you must always pay attention to check whether the parts are loose, and ensure that all parts are firmly installed.

3. Maintenance of the bearings of the sand making machine. The bearings of the sand making machine directly affect the normal operation of the machine, so the maintenance of this part is very important. During the production process, not only must always pay attention to the use of the bearings, but also replace the damaged ones in time. Secondly, the daily lubrication of the sand making machine bearings must be indispensable to prevent the bearing temperature from being too high and eliminate the shutdown of the sand making equipment.