How to detect cone crusher

How to detect the cone crusher? This question is something that users must pay special attention to when buying. We need to understand the matters that need to be paid attention to in the work of the cone crusher. We also need to understand the correct operation method and maintenance measures. Inspection is also one of the maintenance knowledge of equipment.

1. Testing time: After the equipment finishes working, it can only start testing after cooling down for five or six hours.

2. The inspector * checks the flatness of the cone crusher surface by hand to see if there is any unevenness. If there is, inform the technicians to modify it.

3. If unqualified parts or parts with deviations are found, they should be replaced in time.

4. Before starting the machine, check whether the equipment is installed well, and everything is normal to start the machine. During the dry running process, check the sealing, jamming, friction, and collision of the equipment.

5. During the trial run, check if the cylinder shakes obviously and if there is too much noise, make sure that the cylinder shake does not exceed 0.5mm and the noise is controlled within 85db.

6. After the cone crusher is put into formal work, the staff needs to insert a special thermometer for rolling bearings into the oil control of the bearing seat, and measure it every about an hour until the temperature is stable.