How to maintain the mining vibrating screen

　　The daily maintenance of the mining vibrating screen includes the surface of the screen, the tightness of the mining vibrating screen, especially the screen surface, and the mining vibrating screen should be tightened in time when it is loose. mining vibrating screens should be cleaned regularly on the surface of the screen. The parts of the paint peeling off of the paint should be repaired, derusted and painted in time. The exposed processing surfaces should be coated with industrial petroleum jelly to prevent rust.

　　Regular inspections of mining vibrating screens include weekly inspections and monthly inspections.

　　1. Weekly inspection of mining vibrating screen: check the bolt fastening of the exciter, screen surface, supporting device, etc., and tighten the mine vibrating screen when it is loose. Check the use of the transmission device and the locking of the connecting bolts, and check the tension of the V-belt with the mine vibrating screen, and properly tighten it if necessary. When inspecting the sieve of the mine vibrating screen, the mine vibrating screen must pay special attention to check whether the unbalanced weight on the flywheel is securely fixed. If the fixing is not secure, the unbalanced weight of the mine vibrating screen may leave the flywheel when the sieve is running. , Resulting in a safety accident.

　　2. Monthly inspection of mining vibrating screen: check the wear of the screen surface. If there is obvious local wear of the mine vibrating screen, take necessary measures (such as changing the position, etc.), and re-tighten the screen surface. The mine vibrating screen inspects the entire screen frame, the mine vibrating screen mainly checks the welds of the main beam and all the beams, and the mine vibrating screen carefully checks whether there are local cracks. Check all the bolts on the side plate of the screen box. When the bolts and the side plate are found to be loose or loose, the mining vibrating screen should be replaced with new bolts.

　　Special attention should be paid to the maintenance of mining vibrating screen:

　　1. The disassembly of the exciter and the transmission device should be carried out by experienced technical workers. The mine vibrating screen is strictly prohibited from brutal operation, and the mine vibrating screen prevents damage to the equipment. Keep the parts clean before assembling the mine vibrating screen.

　　2. The new screen after replacement of the mining vibrating screen should be re-tensioned every 4-8h, and the mining vibrating screen should be fully tensioned.