The reason for the low production capacity of the stone crushing production line

What is the reason for the low production capacity of the stone crushing production line? Obviously there is a lot of production capacity, why is it less and less after using it soon? In actual production, the output of finished stone is related to many factors. For example: (the hardness of the material, the humidity, the fineness of the finished material, the maintenance and quality of the equipment itself, etc.) There are various factors that affect the output of the crusher in the stone crushing plant.

1. The fineness of the finished stone is different

The higher the fineness requirement, that is, the finer the crushed material, the smaller the crushing capacity. Generally, it depends on the fineness requirements of the concentrator. If there are no special requirements, the fineness of the material can generally be set to medium fine. The production capacity and energy consumption of different models of stone crushers in the stone plant are different during operation. Users need to purchase the appropriate type of stone crusher in the stone plant, otherwise it will affect the output of the equipment, and the production may also cost more. cost.

2. Whether the production operation conforms to the specification

Regular maintenance The standardized operation and regular maintenance of the stone crusher in the stone plant will also affect the production capacity of the equipment. If a stone crusher in a stone factory is operated irregularly and without regular maintenance, the wearing parts of the equipment will be accelerated, the life of the equipment will be ly reduced, and the production volume per unit time will be small.

3. Equipment reliability of stone crusher in stone plant

A high-quality stone crusher is not only energy-saving and environmentally friendly, but also can easily achieve the expected output of the equipment. Not only that, high-quality equipment manufacturers use high wear-resistant materials during production, and the equipment produced can be very good. It can meet the production needs of users and provide a more favorable guarantee for continuous, high-efficiency and safe production. Whether the plan design of the stone crushing production line in the stone factory is appropriate is related to all the equipment of the whole production line. For example, if the output is required to be 1000 tons/hour, then you cannot only require the stone crusher of the stone factory to reach 1000 tons per hour. The processing capacity of the machine, belt conveyor, etc. should also be matched with it, otherwise the output will definitely not be achieved.