What is the matter with the sand making machine being forced to stop

Sand making machines are widely used in ore crushing operations. The forced shutdown in production not only seriously reduces the economic benefits of the enterprise, but also endangers the operators. Therefore, we need to operate in accordance with the specifications to reduce the probability of accidents and improve production efficiency.
 

Reduce the occurrence of sudden failures:

1. The impact load of the main shaft in the production of the sand making machine is relatively large. If the equipment is in an overloaded working state for a long time, the main shaft will be broken and the equipment will be forced to s*. Therefore, in production, the equipment should be strictly prohibited from working for a long time to reduce the damage of the spindle.

2. The bearing is the same as the main shaft. If the bearing is locked during production, the equipment will be forced to s*. Therefore, we should adopt the correct installation method in production and adjust the clearance after installation. On the other hand, the bearing should be well lubricated to reduce the forced shutdown caused by the bearing locking.

Correct operation method:

1. Some careless operation details may cause the device to be forced to shut down. For example, the particle size of the material put into the machine should not be too large or too much, and the sand making machine should be careful not to let iron or other impurities enter during the production process.

2. Control the water content of the crushed materials, because the materials with a lot of water are easy to adhere to the inner wall of the machine when they enter the crushing cavity, thereby blocking the materials in the crushing cavity and causing the equipment to be forced to s*. Therefore, the sand making machine must be operated correctly. operate.

Notes in production:

1. Check whether the tightness of the V-belt is appropriate, otherwise it will not be able to provide enough power for the normal operation of the machine, and pay attention to whether the voltage at the production site can support production, otherwise the equipment will be forced to s*.

2. Pay attention to the maintenance work of the sand making machine, ensure the coordination between various components, and reduce the downtime caused by the damage of important components.