How to repair the bearing of cone crusher

As one of the important parts of the cone crusher, the bearing supports the various structures of the cone crusher and bears the impact force brought by the crushed materials. Its directly affects the normal operation and production efficiency of the equipment.
 

Bearing cleaning of important parts of cone crusher: Because the cone crusher is in a harsh working environment for a long time, the bearing surface will be covered with a lot of dust. It should be cleaned regularly in order to improve the working efficiency and service life of the cone crusher bearing.

Bearing inspection of important parts of cone crusher: Regularly check the status of the bearing of the cone crusher. If problems are found during the inspection process, they should be solved in time, and the severely worn bearings should be replaced in time. At the same time, during the inspection process, pay attention to observe the temperature change of the cone crusher bearing. If the temperature is too high, s* working immediately, check carefully, find out the problem, and solve the problem.

Bearing lubrication of important parts of cone crusher: The bearings are regularly lubricated to ensure the efficient operation of the cone crusher. Since the bearings carry the full load of the system, good lubrication can delay the life of the bearings. However, the lubricating oil used for bearing lubrication should be clean, the seal must be good, and it must be operated correctly according to the operating instructions. The use of lubricating oil should be appropriate, because too much or too little will affect the heat transfer and lubrication of the cone crusher bearing.