In the long-term development and operation of sand washing machine equipment in the stone production line, there will be various wear or failures. Effective sand washing machine maintenance can reduce the failure rate and unnecessary maintenance management costs of enterprise equipment.
The sand washing machine is used in the stone production line. Matters needing attention in the sand washing machine in the stone production line:
When the sand washer is * installed, a thorough inspection should be carried out. At the same time, the machine should start empty for 8 hours. When the sand washer is running empty, the technician should continuously add lubricant, check that the connection points of the sand washer are safe, and then load and operate for 8-24 hours.
Regular maintenance and inspection of sand washing machine equipment, timely development and resolution of problems found, to ensure the normal operation of the sand washing machine. If the maintenance is not timely, various failures of the sand washing machine may occur, which reduces the production efficiency of the sand washing machine.
The sand washing machine should ensure that the basic knowledge of the production line of the enterprise is firm, and there is enough space for production development to ensure the smooth completion of transportation and production of materials. After cleaning, there should be enough storage network space for machine sand to avoid secondary environmental pollution caused by the use of machine sand.
After using the sand washing machine, it is necessary to develop the habit of cleaning in time. Sand washing machines should be lubricated regularly. When lubricating, choose a lubricant of the specified specification and brand, and don't forget the lubrication points. The steel and outdoor working environment of the sand washing machine require the sand washing machine to remove rust and prevent rust in time. Regularly observe the internal wear of the sand washing machine. If the parts of the sand washing machine are worn and affect the production operation, they must be repaired or replaced in time. After the important wearing parts of the sand washing machine are worn out, please contact the manufacturer for repair and replacement in time.