How to maintain the bearing of the sand making machine

The sand making machine is the main equipment for producing artificial sand, and the bearing is the key part of the sand making machine. In the process of use, it is very important to operate the sand making machine correctly, and it is also very important for the maintenance and maintenance of key components. Regularly scheduled maintenance and overhaul to maximize the of the equipment and improve the service life of the sand making machine.
 

The shaft of the sand making equipment bears the full load of the machine. Regular lubrication directly affects the service life and operating speed of the equipment. Therefore, regular lubrication is required, and the injected lubricating oil must be clean and well sealed. It must be used in strict accordance with the lubricating oil in the instructions. standard.

The bearing is not smooth, which directly affects the service life and efficiency of the sand making machine. Therefore, we need to pay special attention when using it, and check and maintain it regularly. The general practice is as follows:

When the sand making machine works for about 400 hours, it is necessary to add lubricant to the bearings; it is calculated by running 10 hours a day and starting 20 days a month, which is about once every 2 months; if it is not used for a long time, be sure to start the machine * Lubricate the bearing of the sand making machine;

After running for 2000 hours, deash and clean the bearing; after conversion, if it has been used all the time, it can be cleaned once every six months (6 months);

After 7200 hours of operation, new bearings need to be replaced; those that are used frequently should be replaced every 3 years, and those that are not used frequently should be replaced every 4 years;

The bearing oil temperature is not easy to be too high. If it is summer, it is recommended that the continuous operation should not exceed 12 hours, and the machine can be shut down properly.