How to prevent oil leakage of spring cone crusher

Ensure that the spring cone crusher is well sealed: the quality of the sealing structure design is related to the sealing effect and the life of the sealing ring. The sealing effect of the sealing ring depends on the correctness of the size of the installation groove. The installation groove of the sealing ring is too deep, the compression of the sealing ring is not enough, and the sealing effect cannot be achieved. Therefore, the sealing structure should be reasonably designed and processed to ensure the sealing of the sealing device. Correctly install the sealing ring to ensure good sealing of the equipment. Do not install the seal with angular tools to prevent scratching the seal and avoid stretching it into a deformed position. The sealing ring can be properly lubricated for installation.
 

Inspection of spring cone crusher in production: regularly check whether the filter is blocked or damaged, replace the kinked oil discharge pipeline, and ensure the smoothness of the oil return pipeline. At the same time, attention should be paid to cleaning the ventilation cover on the side of the drive shaft frame of the spring cone crusher, and use compressed air to purge the long core hole on the drive shaft frame connected to the ventilation cover; Whether the gap is reasonable to prevent the lubricating oil splashing between each other from forming an oil seal, resulting in oil leakage of the spring cone crusher.

It is forbidden to increase the temperature of the lubricating oil of the spring cone crusher: the increase of the lubricating oil temperature will easily reduce the viscosity of the oil and accelerate the aging of the sealing elements, resulting in serious oil leakage. Therefore, we should prohibit the lubricating oil temperature of the spring cone crusher from rising. The heat dissipation effect of the oil tank can be improved by increasing the heat dissipation area of ​​the oil tank. If necessary, a cooler can be added to reduce the lubricating oil temperature.