How to maintain and repair the vibrating feeder

In the production process, the vibrating feeder is used to uniformly, continuously or quantitatively feed the block, granular and powdery materials from the storage bin or hopper to the receiving device. Due to the complex nature of the material, the wear and tear of the vibrating feeder The influence is different, the daily maintenance precautions of the vibrating feeder:
 

1. Always check the amplitude and motor current of the feeding chute, and pay attention to whether the sound of the vibrating feeder is normal. If the sound suddenly becomes louder or there is a crash, carefully analyze the cause and s* immediately. Overhaul the motor every six months and replace the internal bearings.

2. The clearance of the eccentric block of the excitation motor must be balanced at all times. Always check whether the bolts are loose and whether the clearance is normal. If the eccentric blocks at both ends run out of synchronization or the strength is inconsistent, it is easy to burn out the motor and affect the use of the entire equipment. Therefore, processing must be s*ped immediately.

3. Always check whether the suspension device is loose. If the suspension device is loose, it will make the four corners of the vibrating feeder unbalanced and affect the feeding quality, so it should be tightened immediately.

4. Always check the vibration amplitude during the use time and observe whether the surface temperature of the motor is normal.

5. Strengthen the lubrication work of the vibrating feeder, and regularly add lubricating oil to the bearing during use, once every two months, and once every 30 days in high temperature season.