What will be the impact of uneven feeding of vibrating screen

The vibrating screen is a fine powder screening equipment with high precision, low noise and fully enclosed structure, which is suitable for screening and filtering of materials such as particles and powders. Vibrating screens have been widely used in food, chemical, metal, mining and other industries. How to correctly feed the vibrating screen during the production process has always been a concern of many users, but some users may ignore the problem of uneven feeding of the vibrating screen during the screening process. So what impact will uneven feeding have on the vibrating screen?

1. Low screening efficiency

When using a vibrating screen, uneven feeding will ly reduce the screening efficiency. If there is too much feeding at one time, the screening load that the screening machine can bear will be dyed, so that the material will be discharged from the discharge port before being screened. As a result, too much fine material is discharged from the coarse material port, which will ly reduce the screening efficiency.

2. Affect the output and screening accuracy of the vibrating screen

When the feeding of the vibrating screen is uneven, there will be a phenomenon that there is no material on one side of the screen surface and the other side, which reduces the utilization rate of the entire screen surface and causes the problem that the output cannot meet the requirements. On the other hand, due to uneven feeding, the material accumulation on one side is too thick. Once the material accumulation thickness is too large, it will affect the screening accuracy and output.

3. Reduce the service life of the motor

If a large amount of material is put into the vibrating screen for a long time during the production process, the load on the motor will suddenly increase, which will damage the vibrating motor and reduce the service life of the motor. In the long run, users must continue to maintain or replace the motor to increase equipment maintenance costs.

4. The screen is damaged quickly and the service life is reduced

When using a vibrating screen, the feed is not uniform or too much at one time, which has exceeded the pressure of the screen. Because the filter screen is under a lot of pressure, it will cause the filter screen to be damaged quickly. Reducing the service life of the screen is another important manifestation of uneven feeding. In the production process of the vibrating screen, if the number and weight of the screen are not uniform during the feeding process, the screen will be in a long-term qualified state, and the operation of the screen in this state will ly reduce the service life of the screen. Once the screen is damaged, it will affect the output and screen accuracy. Therefore, the screen of the vibrating screen must be replaced! If this happens for a long time, it will not only affect normal production, but also increase equipment maintenance costs.