How to adjust the ore discharge port of the cone crusher

The main wear part of the cone crusher is the lining plate. The movable cone lining plate and the fixed cone lining plate are constantly worn, which makes the ore discharge port gradually increase, resulting in inaccurate particle size of the finished product. How to adjust it?
 

1. It is realized by means of the zigzag threaded ascending and descending fixed cone liners between the adjusting ring and the supporting sleeve.

2. In order to lubricate the toothed thread and facilitate adjustment and disassembly, the thread must have sufficient clearance.

3. For the adjusted ore discharge port, the method of steel wire lead ball can be used to measure the size of the ore discharge port through the crushing chamber to the ore discharge port.

After the operator adjusts the discharge opening of the cone crusher, he can measure the size of the discharge opening with a steel wire lead ball, lift the adjustment ring, and twist the equipment to put the lead ball into the crushing cavity, and the four sides are opposite to each other along the circumference of the crushing cavity. Whether the adjustment of the position measurement discharge port is accurate, and the adjusted size of the discharge port of the cone crusher requires a locking cylinder to lock the adjustment ring and then restart the cone crusher.