Analysis of the reasons affecting the particle size of the stone crushing production line

The output size of the entire stone crushing production line directly affects the price of the finished material. It is not only the crushing of large stones into small stones, including construction sand and gravel in recent years, and the gravel used in highways. The quality of the product has strict requirements, and the gradation ratio required by different industries is also different. A good grain size will bring considerable profits to the enterprise.

Then we need to understand which part of the entire stone production line determines the output size. Usually the stone production line is composed of feeding, coarse crushing, medium and fine crushing, screening, returning crushing, and re-screening. Feeding may be A part of the natural fine material is separated, but the amount is very small, and the effect on the content of needle flakes is also small. So someone should ask, why is it small? Because if the amount is large, it basically belongs to weathered rock, and this material source is not suitable for the production of coarse aggregate.

Although the working principle of the jaw crusher is squeezing and crushing, it will produce a certain amount of needle-like flakes, but because it is coarsely crushed, it will not directly go to the sieve, nor will it affect the content of needle-like flakes. After that, * of the equipment selected in the medium and fine crushing process is the impact crusher and the cone crusher. The impact crusher belongs to the traditional crusher. It has the advantage of low price. It is suitable for crushing rock with low hardness. Causes serious wear and tear and is not cost-effective to use. At this time, it is a good choice to choose hydraulic cone crusher, and the output particle shape of hydraulic cone crusher is still very good, which can meet the requirements of * industries.

If you want to have a better output size, you must choose the medium and fine crushing equipment, and the entire production line must be reasonably matched. If you need to configure a production line, you can consult Jiaozuo Zhongxin, a professional technical engineer for you Matching type selection.