Causes and solutions for cone crusher host overload

During the use of cone crusher, the host may be overloaded sometimes, causing the equipment to fail to work properly. So what are the causes of cone crusher host overload? What are the solutions?
 

cone crusher

What are the causes of cone crusher host overload?

1. Improper operator

When the operator uses the cone crusher normally, if he does not follow the correct operating steps, it is easy to cause the host to overload. For example, uneven feeding, blocked feed port, overload operation, etc. may cause the risk of cone crusher host overload.

2. Equipment failure

During the use of cone crusher, equipment failure is also one of the reasons for host overload. For example, transmission system failure, crushing chamber blockage, gear damage, etc., will generate impact force and reaction force, causing cone crusher host overload.

3. Material properties

Material properties are also an important factor causing cone crusher host overload. If the material hardness is too high or too viscous, it will ly increase the crushing difficulty of the cone crusher host, which will lead to cone crusher equipment overload.

What are the solutions to cone crusher host overload?

1. Improper operator

In order to solve the problems caused by improper operator, it is necessary to train operators and teach them the correct operation methods. At the same time, it is necessary to carry out equipment maintenance and maintenance to ensure the normal operation of cone crusher equipment and prevent accidents.

2. Cone crusher failure

For cone crusher failure, it is necessary to regularly inspect and maintain the equipment and solve problems in time. When inspecting the equipment, special attention should be paid to whether the transmission system is normal, whether the gears are worn, whether the crushing chamber is blocked, etc.

3. Material properties

For material properties, pretreatment methods can be used, such as using pretreatment equipment such as vibrating screens and crushing screens to classify and screen materials, reduce the impact and reaction force of large pieces of material on the host, and thus prevent cone crusher host overload.