How to install the triangle belt of the fine jaw crusher

The fine jaw crusher is an efficient crusher, which is widely used in construction, mining, sand making, metallurgy and other fields. If you want the fine jaw crusher to play its own , you must understand the installation of the V-belt. Let's take a look at it below.
 

1. Installation of the V-belt of the fine jaw crusher

   (1) Before installing the V-belt, it is necessary to appropriately shorten the belt spacing of the fine jaw crusher to facilitate the installation of the V-belt. Forcible installation with iron rods is not allowed to prevent damage to the V-belt.

   (2) Check the straightness of the end faces of the two wheels with a ruler to ensure that the end faces of the two wheels are in the same plane.

 2. Inspection of the pre-tightening force of the V-belt

   (1) Use the method of loosening the edges and checking the winding to check the pre-tightening force of the V-belt.

   (2) After the fine jaw crusher has been fully loaded for 2-3 hours, check the tension of the V-belt again and make necessary adjustments.

The installation of the V-belt of the fine jaw crusher is very simple, but its quality must be ensured during the installation process to avoid unnecessary problems that affect our normal use.