Reasons for bearing heating of granite sand making equipment

Reasons and solutions for bearing heating of granite sand making equipment

(1) The bearing is damaged, and the solution: the problem can only be solved by replacing the new bearing.

(2) The bearing is short of oil or dust, the solution: add oil or clean the bearing.

Method for protecting bearing of granite sand making equipment

(1) When lubricating the bearings of granite machine-made sand equipment, pay attention to selecting the appropriate grease consistency and lubricant at different temperatures. Good can be divided into high-temperature, medium-temperature, and low-temperature grease. Choose the appropriate grease according to the working temperature. grease.

(2) The oil seal is used to prevent debris or moisture from entering, thereby protecting the bearing.

(3) Incompatible oils and fats cannot be mixed. If you want to replace the new grease, you must * thoroughly clean the old grease on the bearing, and then add the new grease.

(4) Coat a layer of oil film on the bearing surface of the granite machine-made sand equipment to prevent the bearing from being corroded.