How to solve the phenomenon of unstable output of cone crusher

The cone crusher mainly adopts the principle of lamination crushing to achieve coarse, medium and fine crushing of various ore materials. In the production process, what are the reasons for the unstable production capacity of the cone crusher?

1. Material hardness

The hardness of the material directly affects the capacity of the cone crusher. Generally speaking, the er the hardness of the mineral, the more difficult it will be to crush, and the more serious the wear of the cone crusher components will be, which will inevitably lead to the production of the crusher. Therefore, it is suggested that the user should do the preparatory work before crushing, such as the hardness and humidity of the material.

2. The composition of materials

The higher the content of fine powder in the material, the more it will affect the crushing efficiency of the cone crusher, because in the case of a large amount of fine powder, when it enters the inside of the cone crusher, it will stick together or adhere to the crushing wall, which will affect the normal crushing work. Therefore, for materials with high content of fine powder, screening treatment is required in advance, that is, a material screening treatment process is added before the cone crusher to remove excess dust, so as to ensure that the normal operation of the cone crusher will not be affected. .

3. The particle size of the crushed material

The particle size of the crushed material is also a major factor affecting the capacity of the cone crusher. In the process of production operation, if the fineness requirements to be achieved after the material is crushed is very high, then relatively speaking, the crusher needs to use more force when crushing the material, if the user does not choose the cone crusher with the relative processing capacity. , then the production capacity of the cone crusher will be reduced, so it is recommended that when purchasing a cone crusher, users must carefully check the cone crusher parameter table given by each manufacturer or consult the manufacturer's technicians in detail to select the appropriate particle shape according to the actual production. Model size cone crusher.

What should I do if the capacity of the cone crusher is unstable? In order to make the cone crusher give full play to the production capacity of the entire production system, do the following:

1. Uniform feeding, when the material fills the feeding cavity and reaches the full feeding, the layer compression and crushing can be realized;

2. Do not enter too large blocks;

3. Can not enter iron blocks, such as excavator and forklift bucket teeth, drill bits and other unbreakable objects;

4. Correct maintenance is also an important factor to ensure the high-yield operation of the cone crusher.