How to prevent iron from entering the cone crusher when it is working

To prevent the cone crusher from passing iron frequently, it is mainly introduced from the following three aspects:

1. Strengthen the inspection of the wear of the belt funnel liner, and replace it in time if any problem is found to prevent it from falling off and entering the crusher.

2. A reasonable iron separator is installed on the head of the feeding belt of the cone crusher to remove the iron blocks entering the crushing cavity, so that the lining plate is balanced and even during the crushing process, so as to avoid damage.

3. Install an electronically controlled pressure relief valve on the cone crusher. When the iron parts enter the cone crusher and the detection pressure rises, the pressure relief valve is opened instantly to drain oil, the main shaft is lowered, and the iron parts are discharged.

Don't panic if the cone crusher has iron or other failures at work. It is necessary to shut down the equipment in time, and then analyze the failure, determine the cause of the failure, and take effective measures to ensure the continuous and stable operation of the equipment and the orderly production of the equipment.