How to prevent the wear of bevel gear of cone crusher

The bevel gear is an important driving part of the cone crusher, and its operation directly affects the overall reliability of the crusher. The bevel gear of the cone crusher is seriously worn, and the causes and preventive measures of the bevel gear wear are analyzed.
 

1. The grinding index of the crushed material is large.

If the grinding index of the material to be crushed is large and the impact on the bevel gear is large, under the long-term overload operation, the accessories of the cone crusher are likely to cause serious wear or breakage of the bevel gear teeth.

2. Impurities in bevel gears

In cone crusher work, the gears need tight consistency. If impurities get in, the friction of the bevel gear will increase, causing wear and damage.

3. Poor lubrication of bevel gears

Good lubricating conditions are one of the ways to prevent the wear of various parts of the crusher. If the lubricating oil quality of the gear is unqualified and the lubricating method is incorrect, the lubricating condition of the gear will be damaged and the wear will be aggravated.

4. The fit of the bevel gear is not suitable

Poor gear meshing is also an important reason for the damage of the bevel gear of the cone crusher. If the gear teeth are poorly meshed, the clearance between the tooth side and the tooth tip will not be within the specified range, which will cause the gear to be damaged in a short time.