Why does the cone crusher overheat

The cone crusher has the advantages of high output and good output particle shape. The range of materials that can be processed is very wide. It is widely used in medium crushing and fine crushing. It is very popular with customers, but sometimes the cone crusher has overheating effects. What happened?

     1. The excessive tension of the triangle drive belt installed on the motor makes the whole machine very difficult to run. The friction between the moving cone of the chassis and the bearing becomes larger, and the temperature continues to rise, which seriously affects the operation of the whole machine. In some cases, the purchaser needs to ask a professional installer to adjust the belt tension.

     2. In the process of feeding and discharging, the amount of material cannot be well controlled. Too much feed volume or too small discharge opening adjustment results in increased operating power of the machine. In severe cases, the surface bushings of the cone crusher are even burnt at high temperatures.

     3. The bearing hole of the cone crusher is blocked by long-term accumulation of dust and oil, or the daily cleaning work is not in place, and eventually the lubrication system will run idle or difficult to rotate. Therefore, timely cleaning the machine and checking the smoothness of the lubrication system are Very necessary.

     4. Now on the general cone crusher, we are equipped with equipment specially used to cool the machine, usually water cooler or exhaust device, in between, if the water cooler has not been cleaned for a long time, the area on the exhaust device If there is a lot of dust, the hot gas generated in the entire operation cannot be dissipated in time. In severe cases, it will cause the overheating effect of the cone crusher.