Method of adding sand making machine oil correctly

Cobblestone sand making machines have many long-term running parts such as bearings and hydraulic devices. Each part has a specific lubricating oil. Lubrication for different metal objects should not be added incorrectly. Do not make the equipment abnormal for convenience.

Do not mix new and old smooth oils in the equipment of the cobblestone sand making machine. For smooth oil problems except regular operation, all parts of the equipment need to be checked and maintained regularly to consolidate and ensure normal use. In , whether the tightened components are loose, ensure that the components are in a tightened and no loose state before the device can be started.

What is to be mentioned at this time is the problem of lubricating oil, whether each component is in a smooth state. Calcium-sodium-based smooth oil is more commonly used because it is insoluble in water and has *adhesion. It can be attached to the bearing surface to form an oil film. Therefore, it is used in the core component bearing of the pebble sand making machine. It has better anti-rust and anti-pollution effects.

Because the cobblestone sand making machine is produced and operated in a leaky environment, in rainy weather, due to the failure of the rain prevention measures, the rainwater will penetrate into the bearing room along the gap of the bearing seat seal, and the rainwater moisture The bearing grease (such as sodium-based grease) is emulsified and deteriorated, and even affects the corrosion of metal parts in use.

Moisture can also accelerate the oxidative deterioration of lubricating grease, and promote the softening of lubricating grease and increase the consistency. Some test results show that even a trace of 0.01% trace moisture can also have an adverse effect on the bearing. Lubricating oil pollution and deterioration After using the lubricating oil for a period of time, some dirt will be deposited, and these dirts will directly cause the lubricating oil to thicken. Solution: Pour out the dirty lubricating oil, inject new lubricating oil after cleaning the bearing box, remember to seal the bearing box well.

When the cobblestone sand making machine is operated in a high temperature environment, its properties will not be changed. It can be useful to avoid that the bearing of the cobblestone sand making machine will lose the original smoothness due to the high temperature during the operation. effect. For two incompatible greases, if they are mixed and used, it will cause the loss of the original effect, appear soft, and even lose its effect, the original maintenance effect on the bearing will be lost. We must learn to maintain sand-making equipment in order to put it into production better. Therefore, it is also very important to master the method of adding lubricating oil.