Degree of wear of accessories: The crushing wall and rolling mortar wall of the cone crusher are the main components that directly contact the material. They will wear after a period of use. When the thickness of these parts is worn to two-thirds or crack

Material particle size: Different crushers have specific requirements for the particle size of materials that can be processed. Material particle sizes that are too large or too small may affect the output of the crusher. Therefore, before feeding materia

Jaw crushers are mainly used for coarse and medium crushing in mining, building materials, infrastructure and other industries. They have the characteristics of large crushing ratio, high output, simple structure, uniform crushing particle size, and simpl

The wear of the cone crusher is mainly affected by factors such as ore hardness, residual material accumulation in the cavity, crushing cavity blockage, crushing cavity quality, feeding method and other factors. In order to reduce the wear of the cone cru

Spring cone crusher is a crusher with high power, large crushing ratio and high productivity. It has many obvious advantages, which are mainly reflected in the following aspects:

From April 15th to 19th, 2024, the 135th Canton Fair was held grandly at the Guangzhou International Convention and Exhibition Center. The exhibition focused on industrial manufacturing, import exhibitions, trade services, etc., and was supported by the b

Abnormal temperature of the jaw crusher may be caused by many factors. Here are some possible reasons:

The correct feeding method of the cone crusher is crucial to its normal operation and crushing effect. Here are some suggestions for the correct way to feed a cone crusher: 1. Ensure uniform feeding: The feeding material should be evenly distributed in th

Check the sealing device: The sealing device of the cone crusher is a key component to prevent lubricating oil leakage. Sealing device failure may be caused by aging, wear, improper installation or design defects of the sealing material. The wear of the O

The reasons for the noise produced by the cone crusher during operation may include the following points: 1. Inertial force: The cone crusher will generate inertial force during operation, which may cause impact vibration in the crusher, thereby causing n