Because the volume of the jaw crusher is relatively large, the internal hammer head will drive the machine to vibrate when it rotates. In the production line, the hammer head is driven by the belt conveyor to complete the crushing operation. The hammer he

When the cone crusher is in production, it usually encounters the blockage of raw materials in the crusher, which will cause the equipment to stop production. In this case, it usually takes a long time to clean up the blocked raw materials, which seriousl

Regularly check the amplitude and coil current of the feeding trough of the vibrating feeder, and pay attention to whether the sound of the equipment is normal. If the sound suddenly becomes louder, or if there is an impact sound, you must carefully analy

The rotor is the core component of the sand making machine, mainly for crushing and shaping materials. In actual production, it is a normal phenomenon that the rotor accumulates material. However, if the amount of accumulated material is not appropriate,

Before purchasing machine-made sand production line equipment, the production scale and output requirements must be determined. It is also necessary to choose a suitable sand making machine manufacturer, and choose a manufacturer with strength, good reput

The jaw crusher should be placed in a dry room. If it cannot be placed indoors, it is necessary to choose a relatively flat ground and lay wooden boards. Then cover the device with a drapery.

The output of the sand making machine is closely related to the production efficiency of the sand making machine. If the sand making machine discharges slowly, the output of the sand making machine will decrease, which will affect the production efficienc

The working conditions of the cone crusher are generally very harsh, which can cause damage to the cone crusher. Improper operation and maintenance can result in damage to the cone crusher. In the production process of the cone crusher, in order to reduce

When the jaw crusher is working normally, it will generate heat, so the bearing temperature should be checked in time. If there is an abnormal temperature, there could be too much or not enough grease, dirty grease, or damaged bearings. The amount of grea

The function of lubricating oil for multi-cylinder hydraulic cone crusher is to lubricate and dissipate heat. Poor lubrication can easily lead to serious wear of the copper sleeve, copper scraps and copper skins on the oil return filter, and even burnt co