How to improve the working efficiency of jaw crusher? 1. Material selection is the key. When selecting materials, pay attention to the hardness of the materials. The harder the materials are, the more difficult it is to crush, and the more serious the wea
The main wear part of the cone crusher is the lining plate. The movable cone lining plate and the fixed cone lining plate are constantly worn, which makes the ore discharge port gradually increase, resulting in inaccurate particle size of the finished pro
Due to the relatively high hardness of sand and gravel raw materials, for many customers, the later investment is still relatively large, and the cone crusher quickly occupies the crushing market with its strong cost .
The vibrating screen is a fine powder screening equipment with high precision, low noise and fully enclosed structure, which is suitable for screening and filtering of materials such as particles and powders. Vibrating screens have been widely used in foo
There are many types of crushers in the sand production line, because different stone crushing plants process different stones, and the production line process is also different, so the crushing equipment purchased is different. What are the commonly used
Spring cone crusher is one of the * common stone crushers and plays an important role in large-scale production lines. Because it is frequently used in important mechanical work, there are many operating steps to pay attention to in the later maintenance,
From the characteristics of the material itself, the main reason for the blockage of the vibrating feeder is the high viscosity and moisture. Due to the reduced fluidity of the material, this will lead to the usual phenomenon of "wall hanging" and "she
When the cone crusher is working, if the content of stone powder and the humidity of the material are relatively large, it will easily adhere to the crushing wall and the mortar wall during crushing. After a long time, it will not only reduce the producti
Do not let large ores and non-crushed materials enter the crushing cavity of the compound cone crusher. Although it has a good steel protection system inside, the intrusion of these non-broken materials will not only affect the quality of the output, but
When the single-cylinder hydraulic cone crusher is assembled, the assembly between the bearing outer ring and the bearing seat hole or between the bearing inner ring and the shaft is improper.