Before purchasing machine-made sand production line equipment, the production scale and output requirements must be determined. It is also necessary to choose a suitable sand making machine manufacturer, and choose a manufacturer with strength, good reput

The jaw crusher should be placed in a dry room. If it cannot be placed indoors, it is necessary to choose a relatively flat ground and lay wooden boards. Then cover the device with a drapery.

The output of the sand making machine is closely related to the production efficiency of the sand making machine. If the sand making machine discharges slowly, the output of the sand making machine will decrease, which will affect the production efficienc

The working conditions of the cone crusher are generally very harsh, which can cause damage to the cone crusher. Improper operation and maintenance can result in damage to the cone crusher. In the production process of the cone crusher, in order to reduce

When the jaw crusher is working normally, it will generate heat, so the bearing temperature should be checked in time. If there is an abnormal temperature, there could be too much or not enough grease, dirty grease, or damaged bearings. The amount of grea

The function of lubricating oil for multi-cylinder hydraulic cone crusher is to lubricate and dissipate heat. Poor lubrication can easily lead to serious wear of the copper sleeve, copper scraps and copper skins on the oil return filter, and even burnt co

Frequently check the amplitude of the feeding tank of the vibrating feeder and the current of the motor, and pay attention to whether the sound of the vibrating feeder equipment is normal. If the sound suddenly becomes louder or there is a knocking sound,

Vibrating screen is a screening equipment for material crushing, which plays an important role in the process of sand making production line, and its working efficiency also affects the overall efficiency of sand making production line. There are many typ

Cone crusher is a very commonly used crushing equipment in crushing sand and gravel aggregates. The grain shape of sand and gravel aggregates is the main index to measure the cone crusher. In the field of sand and gravel crushing, the control of the grain

Abnormal vibration during the production process of sand making machine 1. The foundation of the sand making machine is not handled properly, the roadbed is not stable or the anchor bolts are loose. Check the anchor bolts and tighten them.