What to do if the movable jaw of the jaw crusher is out of operation

Jaw crusher is very important in mining machinery. It can crush some large stone materials into smaller granularity materials, and the crushing materials are the movable jaw plate and the static jaw plate inside the equipment. The movable jaw plate It is the key to the main crushing materials, but after a long time of crushing work, the movable jaw will swing abnormally. So what is the cause of the s*page of the movable jaw of the jaw crusher, and how to deal with it?
 

When the jaw crusher is in the crushing operation, if the equipment makes a violent splitting sound, the movable jaw plate inside the equipment will s* swinging. If the movable jaw s*s swinging, it may also be caused by other reasons. For example, if the flywheel continues to rotate, the connecting rod continues to swing, and the tension rod spring becomes loose, it will cause the movable jaw to s* swinging. However, according to the actual production situation, the problem that causes the movable jaw plate to s* is that the non-broken objects enter the inside of the equipment during production, and the thrust plate or rivet will be broken when it affects the thrust plate or rivet. The problem that causes the movable jaw plate to s* is that non-broken objects enter the inside of the equipment during production, and the thrust plate or rivet will be broken when it affects the thrust plate. This problem is caused by not calculating the insurance thrust during installation. of.

If the above situation occurs, immediately s* the operation of the jaw crusher, unscrew the nut, remove the spring on the connecting rod, lift the movable jaw forward, check the sliding cover of the thrust plate, and replace it with a new one. The solution to the thrust plate and connecting rod is to directly replace or repair it.