Factors Affecting Mine Crusher Efficiency

As one of the main parameters of the mine crusher, the crushing force is the basis for calculating the mechanical parameters. It makes sense to ensure the normal operation and expansion of a mine crusher. The following is an introduction to the five main factors that affect the crushing force of a mine crusher.
 

1. The mode of action on the material. Al* all rocks are crushed mechanically, and the methods of crushing machinery include crushing, splitting, grinding and impact, crushing; for brittle ores, bending and splitting are more favorable; for crushing viscous ores, grinding is better. The mine crusher is mainly a combination of crushing and bending, and the different ways of acting on the material determine the difference in crushing force.

2. The movement law of the movable jaw. The trajectory of each point of the movable jaw is reasonably distributed, and the horizontal stroke gradually decreases from the * to the bottom of the jaw plate of the movable jaw, which just meets the requirement of increasing the compression amount when crushing large materials. During the moving process, the upper part of the trajectory is approximately elliptical, moving downward along the crushing cavity, and the movement trajectory of each point on the jaw is elliptical.

3. The nature of the material. Each type of mine crusher has its corresponding applicable materials, and the hardness of the material, the input particle size, the output particle size, etc. will affect the crushing force of the mine crusher. The crushing of inappropriate materials by the mine crusher will not only reduce the crushing force of the equipment, but also cause a certain degree of wear and tear to the equipment. In addition, the particle shape of the material will also affect the crushing force of the mine crusher.

4. The movement of the tooth plate. When the toothed plate moves, the force of the toothed plate is not synchronized in the upper and lower parts, and in some parts they are deviated, the crushing force is generated by the crushing stroke, so the crushing force of the mine crusher in different intervals are different.

5. The size of the transmission angle. The size of the transmission angle has a influence on the of the mine crusher. Increasing the transmission angle is beneficial to improve the force of each part of the mine crusher, increase the crushing force on the material, and improve the production capacity of the equipment.