When the cone crusher is in production, it usually encounters the blockage of raw materials in the crusher, which will cause the equipment to s* production. In this case, it usually takes a long time to clean up the blocked raw materials, which seriously affects the work of the equipment. efficiency. So what are the ways to prevent the clogging of the cone crusher when it is working?
 

1. Inspection work before production of cone crusher
     Before officially starting the equipment, it is necessary to check the equipment to ensure the normal operation of the equipment. Check whether each fastening part in the equipment is firm, check whether the wiring of the motor is correct, whether the V-belt pulley is too tight or too loose, whether the current at the work site is normal, whether there are foreign objects in the crushing chamber of the equipment, etc.

2. Supply requirements
     For the feeding requirements of the cone crusher, more attention should be paid to maintaining the uniformity and continuity of the raw material supply, and the properties of the raw materials must also meet the requirements, that is, the hardness, moisture content, and particle size of the raw materials must be appropriate to prevent the occurrence of clogging phenomenon.

3. Raw materials are processed before feeding
     If the materials to be crushed do not meet the production regulations, the staff will need to process the raw materials, blast the bulk raw materials, screen the raw materials containing a large amount of fine sand, and dry the raw materials with high moisture content, etc. In short, it is to ensure that the raw materials meet the crushing requirements and regulations of the equipment.

4. Adjust the outlet in time
     If the discharge port of the cone crusher is small, it is also one of the important reasons for the blockage. Therefore, it is necessary for the operator to adjust the discharge port in time according to the characteristics of the raw materials during the production of the equipment.

5. Reduce the wear and tear of parts
     If the important parts in the cone crusher are worn or severely damaged, it will not only affect the crushing effect of the raw materials, but also cause blockage. Therefore, the operator must reduce the wear and tear of the equipment during production. If the parts are severely worn, they must be replaced in time, and maintenance work should be carried out regularly to reduce the occurrence of clogging problems and improve production efficiency.